Mifrofine ® Chemical Blowing Agents
Grade Microfine | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
ADC-Z25 | 22 ± 3 | 230 ± 5 | 200 ± 3 | For low density cross-linked PE foams |
ADC-3202 | 19 ± 2 | 235 ± 5 | 200 ± 3 | For low density cross-linked PE foams |
ADC-47 | 11.0±2.0 | 230 ± 5 | 198 ± 2 | For production of EVA slippers, PE extrusion and LDPE rotational moulding |
ADC-H2 | 11 ± 1 | 235 ± 5 | 200 ± 3 | For production of foamed articles based on PVC/PP/ HDPE/LDPE/ABS/rubber |
2A12SS | 11.5 ± 0.5 | 235 ± 5 | 200 ± 3 | For the expansion of chemically and physically X-linked polyolefinic sheets |
5A06 | 10 ± 0.5 | 235 ± 5 | 200 ± 3 | For injection moulded cross-linked EVA footwear in combination with MIKROFINE A14D |
ADC-3222M | 22 ± 3 | 230 ± 5 | 200 ± 3 | For the expansion of chemically and physically X-linked extruded polyolefinic foam for applications in thermo insulation and packing materials, eco-friendly replacements for polyurethane foams |
ADC-L2 | 7 ± 0.5 | 235 ± 5 | 200 ± 3 | PVC leather cloth by spread coating |
ADC-F2 | 5 ± 0.5 | 235 ± 5 | 200 ± 3 | PVC leather cloth by spread coating |
ADC HPKF | 4.0 ± 0.5 | 235 ± 5 | 198 ± 3 | For production of white foams in PVC plastisol applications |
ADC-F4 | 4.0 ± 0.5 | 235 ± 5 | 198 ± 2 | For artificial leather cloth with higher filler content |
ADC-F1 | 4 ± 0.5 | 230 ± 5 | 200 ± 3 | Artificial leather cloth and insulation products |
ADC-LFGD | 7 ± 0.5 | 235 ± 5 | 200 ± 3 | Food grade chemical blowing agent used as an ageing, bleaching agent and dough conditioner |
ADC-HFGD | 11 ± 1 | 235 ± 5 | 200 ± 3 | Food grade chemical blowing agent used as an ageing, bleaching agent and dough conditioner |
HP26AM | 28 ± 2 | 235 ± 5 | 198 ± 2 | For production of low density cross-linked polyethylene foam |
Grade MIKROFINE | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
ADC-Z40 | 40 ± 2 | 230 ± 5 | 193 ± 3 | For low density cross-linked PE/PP foams |
ADC-Z35 | 35 ± 2 | 230 ± 5 | 193 ± 3 | For low density cross-linked PE foams |
2A22SS | 22 ± 3 | 230 ± 5 | 195 ± 2 | For the production of X-linked polyolefinic and rubber foams |
2A26SS | 26 ± 2 | 235 ± 5 | 198 ± 2 | For low density cross-linked PE foams |
ADC-3202M | 20 ± 3 | 225 ± 5 | 192 ± 3 | For the production of low density X-linked polyolefinic foams |
ADC-H5 | 11 ± 1 | 230 ± 5 | 191 ± 2 | Rigid PVC foamed sheets and pipes |
ADC-L5/4075 | 7 ± 0.5 | 230 ± 5 | 191 ± 2 | PVC shoe soles, EVA slippers, PE extrusion, LDPE rotational moulding and rubber foams |
ADC-F5 | 5 ± 0.5 | 230 ± 5 | 191 ± 2 | For rigid PVC foam sheets |
ADC-F3 | 4 ± 0.5 | 230 ± 5 | 191 ± 2 | Thicker artificial foamed PVC leather cloth (4 mm and above) |
ADC F6 | 5 ± 0.5 | 230 ± 5 | 190 ± 2 | Cellular foamed injection moulded PVC articles |
HP 90 | 22 ± 2 | 225 ± 5 | 183±2 | Low density cross-linked polyethelene/ polyolefinic foams by two stage process |
ADC 4070 | 7 ± 1.0 | 230 ± 5 | 189 ± 2 | For PVC shoes soles, EVA slippers |
Grade MIKROFINE | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
ADC-130 | 5 ± 0.5 | - | 130 ± 2 | For low temperature plastisol applications like carpet back foams |
ADC-1300 | - | - | 191 ± 3 | For PVC injection moulding for increased density reduction |
ADC-RT 115 | 5 ± 0.5 | - | 114 ± 2 | For textured wall finish |
ADC-3838 | 8 ± 0.5 | - | 193 ± 2 | For PP/HDPE extrusion and injection moulding. For gas assisted PVC injection moulding |
ADC-21 | - | - | 160 ± 3 | For EPDM profiles with closed cell structure |
ADC-RM1 | - | - | 182 ± 3 | For 2/3 layer LLDPE rotomoulded water tank |
ADC-RM2 | - | - | 176 ± 3 | For 2/3 layer LLDPE rotomoulded water tank |
A14D | - | - | 142 ± 3 | For cross-linked injection moulded EVA slippers, sandals in combination with Mikrofine 5A06 |
ADC-RE | - | - | 166 ± 3 | For EVA compounds and soles, to be used in combination with Mikrofine ADC-SE for crosslinked injection moulded EVA shoe soles/footwear |
HP 340 | 5 ± 0.5 | 205 ± 5 | 189 ± 3 | For production of foamed articles based on rigid PVC pipes, profiles and sheets |
Z14A / Z14A ND | 5 ± 0.5 | - | 143 ± 3 | For the production of vinyl wall covering, floor covering and vinyl leather cloth |
KS18 | - | 205 ± 5 | 182 ± 3 | For production of X-linked injection moulded EVA slipper and sandals |
HP754 | 7 ± 0.5 | 200 ± 5 | 156 ± 3 | Useful in the processing temperature range of 150-175o C for foaming rubber compounds particularly based on EPDM rubber |
A15VM | - | 228 ± 5 | 191 ± 2 | For the production of light weight, crosslinked, extruded PE sheets in combination with MIKROFINE ADC-1500 |
ADC-1500 | - | 195 ± 5 | 181 ± 3 | For the production of light weight, crosslinked, extruded PE sheets in combination with MIKROFINE A15VM |
VRNP | 5 ± 1 | - | 200 ± 3 | For Sn stabilised rigid PVC pipes/profiles and sheets |
SK 3 | - | - | 150 ± 3 | For injection moulded X-linked EVA footwear |
17A | 10 ± 0.5 | 235 ± 5 | 200 ± 3 | For injection moulded X-linked EVA footwear |
17B | - | - | 142 ± 3 | For injection moulded X-linked EVA footwear |
ADC F 404 | 5 ± 0.5 | 205 ± 5 | 178 ± 3 | For artificial foamed PVC leather cloth |
ADC 4747 | 9 ± 0.5 | 200 ± 5 | 175 ± 3 | For production of cellular plastic |
HP 870 | 6.5 ± 0.5 | 195 ± 5 | 140 ± 5 | For production of sponge rubber and expanded plastic specially designed for silicon gum. Also used for EVA based automotive sound deadening and cavity filling compounds. |
Grade MIKROFINE | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
HP F9 | 4.5 ± 0.5 | 205 ± 5 | 168 ± 3 | Pre-activated one pack for NBR insulation foam |
EXRP2 | - | - | 178 ± 3 | One pack for production of cross-linked injection moulded EVA slipper and sandals |
ADC-SE | 5.5 ± 0.5 | 155 ± 5 | 142 ± 3 | For EVA compounds and soles, to be used in combination with Mikrofine ADC-RE for crosslinked injection moulded EVA shoe soles/footwear |
Grade MIKROFINE | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
PT | - | - | 119 ± 3 | For thicker compression moulded EVA/LDPE foamed articles |
SSS-I/II/III | - | - | 195 ± 5 | For cellular rubber products |
ADC-EV | - | - | 118 ± 3 | For thermoplastic resins such as EVA co-polymers, PE and 1,2-polybutadiene rubber |
ADC EW | - | - | 120 ± 3 | For production of cellular products based EVA co-polymer |
AE99 | - | - | 120 ± 3 | For production of EVA co-polymer and LDPE rubber blends |
Grade | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
MIKROFINE 106 | 7 ± 2 | - | Starts from 140 | For crown cork liners, co-axial cables and rotomoulded products |
MIKROFINE 1013 | 7 ± 2 | - | Starts from 150 | For crown cork liners, co-axial cables and rotomoulded products |
MIKROFINE 1026 | 7 ± 2 | - | > 180 | For foaming of thermoplastic resins by injection moulding and extrusion |
Mikrofine 1014 | 7 ± 2 | - | > 150 | For crown cork liners, co-axial cables, PVC foam boards and high density EPE foams |
Mikrofine 7800 | 8.0 ± 1.0 | - | Starts from 140 | For production of PVC foam boards by free foam extrusion process, PS profiles and co-axial cables application |
Mikrofine 1036 | 7 ± 2 | - | > 170 | For polyamide, polystyrene, PPS and other engineering plastics |
Mikrofine 2094 | 7 ± 2 | - | > 130 | Non–ADC grade for PVC injection moulding |
Grade | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
MIKROFINE 5200 | - | - | Starts from 140 | For PVC and TPE in the processing temperature range of 160-170°C |
MIKROFINE 5145 | - | - | > 140 | For rigid PVC profiles, board and foamed sheets |
MIKROFINE HP 1028 | - | - | 196 ± 2 | To be used in combination with MIKROFINE 5145 |
Mikrofine 5400 | - | - | >150 | For PVC and TPE (Thermoplastics) |
Mikrofine 3200 | - | - | >140 | For PVC profiles and boards |
Grade MIKROFINE | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
DT(°C) | Applications |
---|---|---|---|---|
Mikrofine 9145 | 7 ± 1 | 220 + 5 | 187 ± 2 | One pack for PVC foam board application for low and medium low thickness by free foam process |
Mikrofine 2084-F | 5 ± 0.5 | 230 ± 5 | 190 ± 2 | For rigid PVC foam boards in low thickness by free foam process |
Mikrofine 5161 | 10 ± 1 | 200 ± 5 | > 140 | One pack for medium to medium thick PVC foamed board application by Celuka process |
Product Name | Applications | ||||
---|---|---|---|---|---|
MIKROFINE TSH | For epoxy foams, rubber cloth laminates, sponge rubber and slipper soles | ||||
MIKROFINE TSH ND | Non-dusty version of MIKROFINE TSH | ||||
MIKROFINE OBSH | For co-axial cables, EPDM profiles, light colour PVC footwear, and microcellular rubbers | ||||
MIKROFINE OBSH – ND | Non-dusty version of MIKROFINE OBSH | ||||
MIKROFINE OBSH – M 300 | EPDM profile, PVC plastisol applications | ||||
Mikrofine OBSH –LP 500 | Light colour PVC application; micro cellular applications which require viscosity control | ||||
MIKROFINE OBSH - F | Synthetic/natural rubber, rotational moulding of LLDPE | ||||
MIKROFINE OBSH - NE | Non-explosive variant of OBSH |
2,2’-Azobis (isobutyronitrile)
Product & Chemical Name | CAS No. | DT(°C) | Particle Size d 0.5 (Microns) |
Gas (ml/g) at STP |
Chemical Structure |
---|---|---|---|---|---|
POLYAZO AZDN (FF) 2,2'-Azobis (isobutyronitrile) | 78-67-1 | 101 ± 2 | - | 125 ± 5 |
Product Name | Applications | ||||
---|---|---|---|---|---|
POLYAZO AZDN (FF) | For thick section PVC foams and low temperature processing of silicone rubber |
Product Name | Applications |
---|---|
MIKROFINE MB OBSH80 | MIKROFINE MB OBSH80 is a masterbatch of 80% OBSH in a polymeric binder, EPDM, for natural and synthetic sponge rubber |
MIKROFINE MB ADC80 | MIKROFINE MB ADC80 is a masterbatch of 80% ADC in a polymeric binder, EPDM, for natural and synthetic sponge rubber |
MIKROFINE HP-MB ADC70E | MIKROFINE HP-MB ADC70E is a proprietary chemical blowing agent in a polymeric binder, EVA, for the injection moulding and extrusion of thermoplastics |
Product Name | Particle Size d 0.5 (Microns) | Gas (ml/g) at STP | DT (°C) |
---|---|---|---|
Mikrofine 2064 | 6-8 | -- | > 130 |
Product Name | Applications | ||
---|---|---|---|
Mikrofine 2064 | Specifically customised to synchronise with microsphere type of foaming aids in shoe soles wherein, it effectively cuts dosages of microspheres, for refining cell structure to give fine and stable foam in footwear application and further density reduction without compromising on mechanical strength of articles |
Product & Chemical Name | CAS No. | DT (°C) | Particle Size d 0.5 (Microns) | Gas (ml/g) at STP | Chemical Structure |
---|---|---|---|---|---|
MIKROFINE ZBS Zinc (benzene sulfinate) dihydrate | 24308-84-7 | 218 ± 3 | - | - |
Product Name | Applications | ||||
---|---|---|---|---|---|
MIKROFINE ZBS | Activator for azodicarbonamide thus helping production of foamed articles at lower temperature |